25KVA Single Phase Pad Mounted 25kva Single Phase Pad Mounted Transformer

The 25kva Single Phase pad Mounted is rated at 25 kVA with a single phase 11500V Delta primary voltage and a single phase 240/120V (L-N-L) secondary voltage. The unit has a primary loop feed and a dead-before primary connection. We also offer systems with radial feed and dead-before primary/live-before secondary connections. The 25kva Single Phase pad Mounted Transformer has a 5 position tap switch with (2) +/- 2.5% taps above and (2) +/- 2.5% taps below to allow for small variations in voltage. The pad mount 25kva Single Phase pad Mounted Transformer has a primary well bushing and standard spade connectors on the secondary side. The 25kva Single Phase pad Mounted Transformer is equipped with a copper winding consisting of one coil and two core loops.

• Equipment inspection: The 25kva Single Phase pad Mounted Transformer and accessories are intact and meet the design requirements, and the core/cover is checked.

• 25kva Single Phase pad Mounted Transformer in place: Place it stably, and the roller is fixed with a detachable brake device.
• Sealing treatment: Use oil-resistant sealing gaskets for flange connection, and the compression of rubber gaskets shall not exceed 1/3.

• 4. Safety and maintenance

maq per Qat: 25kva single phase pad mounted 25kva single phase pad mounted transformer, China 25kva single phase pad mounted 25kva single phase pad mounted transformer manufacturers, suppliers, factory